Overview
LiteSilver 1-2S is upgraded from the base of LiteSilverware, using MM32F103 chip, and making some modifications on OSD and usage.
LiteSilver supports a variety of protocols for receivers and adds USB functionality for easy firmware updates.
Introduce
1、Flymode
2、OSD
Download
1、Manual
2、Firmware
Other
1、How to set the rate value of the flight control
- Via OSD
- The default is Starter mode, as shown below
- Enter OSD, in the CONFIG menu, select the Mode option, toggle the Roll rocker left for two times, and toggle the Roll rocker right for two times, then switch to Advanced mode, and the Rates setting will appear
- Via Configure
- Update the latest firmware
- Use Configure, under the rates option. See **here **for details.
2、The motor cannot start normally
- The reason is that the idle speed value is too low. You can just increase the idle speed value through the MIN option under the MOTOR menu in OSD.